|
|
 |
|
|
|
| |
|
| |
|
| |
MODEL: S124F01-03 |
| |
|
|
 |
|
|
|
|
|
|
|
| |
1. Description |
| |
Single phase IC card prepayment meter. The user need to charge the meter via IC card before using. It could solve the problems of value issue of the scattered residents, temporally users and always debts users. The software could record the users' information, it will be very convenient to manage all the users. |
| |
| |
2. Technical Parameters |
| |
Voltage |
240V |
Current |
5(60)A |
Accuracy class |
1.0 |
Standard |
IEC62052-11, IEC62053-21 |
Frequency |
50Hz |
Impulse constant |
1000imp/kWh |
Display |
LCD 6+2 |
Power consumption |
0.4%Ib |
Starting current |
≤1.2W and 1.2VA |
Working temperature |
-20～55℃ |
Storage temperature |
-25～70℃ |
Average humidity value of year |
≤75% |
Meter Size |
171.5*52*106mm |
Net Weight |
0.5302kg |
|
| |
| |
3. Features |
| |
Recharge by IC card;
The relay will off when over load. There are 3 methods to close the relay: Inject the IC card ; Press the button; Switch on after 1 minute automatically. The methods could be chosen to switch on via Infrared and RS485;
When the instantaneous power value is more than the threshold, the relay will open. The methods of making the relay close are settable. 1.inject the IC card 2.press the button and the times of using this method should be less than the times of switching off caused by over loaded. 3. switch on after 1 minute automatically;
When the remain energy is less than the threshold, the meter will alarm and the threshold could be set via Infrared or RS485;
Prevent hoarding (too much) credit. The charged credit cannot surpass the preset value threshold. And the sum of recharged credit and left value cannot surpass the extreme credit of the meter either ( 999999.99kWh);
The equipped Vending System has a multiple access management function, and could be operated by multiple accounts and generate reports automatically;
When off power, the meter will record the total kWh, remain kWh, impulse number and also other data that the meter has;
LCD displays total kWh, remain kWh, latest purchasing energy, meter number, user number and the forward and reverse;
Press the button to roll LCD pages:
1. Total kWh
2. Remain kWh
3. Latest purchasing energy
4. Meter number
5. User number
6. The LCD will show Error5 when the remain energy is not enough(it will not alarm if the remain energy is more than the alarm value)
Communication: Infrared and RS485;
There are User’s Card, Recharge Card and Reset Card for this system. |
| |
| |
|
|
|
